Details
-
Philips HeartStart HS1 OnSite Defibrillator
- Calm, clear voice instructions are tailored to the responder’s actions, providing guidance during the resuscitation of a sudden cardiac arrest victim
- Clear, graphics-based visual instructions support vocal instructions, ensuring that minimum reading is required when time is of the essence
- Smart biphasic therapy safely delivers maximum shock strength, using a unique combination of high current to maximise effectiveness and lower energy dose to minimise side effects
- Studies have shown that CPR is even more vital to a victim’s survival and rapidly delivering a shock after chest compressions is critical
- The AED’s Quick Shock feature reduces the time between hands-off and shock delivery
- The unit is easy to operate and simply turns on with an easy-to-use pull handle
- Provided with pre-connected SMART pads, which are also tested for readiness
- The pads sense when they have been applied to the patient’s skin, helping the HeartStart know at what stage of resuscitation the user is at
- Philips Heartstart Smart Pads Cartridge - Adult and Philips Heartstart Smart Pads Cartridge - Infant available
- Ensure your defibrillator has optimal battery life by having a replacement Philips Battery Pack in stock
- Summary of the key features
- Heart-rhythm assessment provided by SMART Analysis technology
- SMART Biphasic energy delivery
- Can be used on children (using the paediatric pads available separately)
- Clear voice instructions including CPR coaching
- Quick Shock ability enables the unit to deliver shock therapy rapidly after CPR
- SMART electrode pads detect when they have been removed from the cartridge
- Daily self-tests check electrical the components, subsystems and battery
- Ready light shows when the defibrillator is ready for use
- IPx5 protection rating (please see our AED buying guide for what this means)
- Technical Specifications
- Battery: 9 volt DC, 4.2 Ah, composed of disposable long-life lithium manganese dioxide primary cells
- Capacity: Minimum 200 shocks or 4 hours of operating time (EN60601-2-4:2003)
- Install-by Date: Battery is labeled with an install-by date of at least five years from date of manufacture
- Standby Life: Four years typical when battery is installed by the install-by date. (Will power the AED in standby state within the specified Standby Temperature range, assuming one battery insertion test and no defibrillation uses)
- Waveform: SMART Truncated exponential biphasic. Waveform parameters adjusted as a function of patient impedance
- Defibrillation peak current - Adult: 32 A (150 J nominal) into a 50 ohm load
- Defibrillation peak current - Pediatric: 19 A (50 J nominal) into a 50 ohm load (using optional infant/child SMART Pads Cartridge)
- Quick Shock: Able to deliver a shock after the end of a CPR interval, typically in eight seconds
- Shock-to-Shock Cycle Time: Typically less than 20 seconds between shocks in a series
- Voice Instructions: Detailed voice messages guide responder through use of the defibrillator
- CPR Guidance: Instructions for adult and infant/child CPR available at user selection
- Shock Delivery: Via adhesive pads placed on patient's bare skin as illustrated on pads
- Controls: Green SMART Pads cartridge handle, green On/Off button, blue i-button, orange Shock button
- Indicators: Ready light, blue i-button, caution light
- Standby Temperature: 0 - 43 °C (32 - 109 °F)
- Operating Humidity: 0 to 95 % relative humidity (non-condensing)
- Standby Humidity: 0 to 75 % relative humidity (non-condensing)
- Standby Altitude: 48 hours from 0 to 8,500 ft and <48 hours from 8,500 to 15,000 ft
- EMI (Radiated/Immunity): Meets EN55011 Group 1 Level B Class B and EN61000-4-3
- Operating Temperature: 0 - 50 °C (32 - 122 °F)
- Operating Altitude: 0 to 4,500 m (0 to 15,000 ft)
- Shock/Drop Abuse Tolerance: Withstands 1 meter drop to any edge, corner, or surface
- Vibration: Meets EN1789 random and swept sine, road ambulance specification in operating and standby states
- Automated and User-activated Self-tests: Daily Automatic Self-tests
- Tests internal circuitry, waveform delivery system, pads cartridge, and battery capacity
- Pads Integrity Test: Specifically tests readiness-for-use of pads (gel moisture)
- Battery Insertion Test: Upon battery insertion, extensive automatic self-tests and user-interactive tests check device readiness
- Status Indicator: Blinking green "Ready" light indicates ready for use. Audible "chirp" indicates need for maintenance
- Data Recording and Transmission: Wireless transmission of event data to a PC or Palm PDA, using the IrDA protocol
- Data Stored: First 15 minutes of ECG and the entire incident's events and analysis decisions
-
Specifications
-
Battery Included?YesBrandPhilipsClassesIP 20Clothing SizeAdult/childColour(s)BlueDefibrillator TypeSemi AutomaticKit ContainsPre-Installed battery
Pre-Installed SMART Pads Cartridge
Quick Set-Up Guide
Maintenance Booklet
Quick Reference Guide
Owners Manual
Slim Carrying CaseMaterialPlasticSize (H x W x L)11 x 23 x 24 cmSupplied inSingleTraining MaterialNoTypeSemi-AutomaticWeight1.7 kg -
Documentation
-
Product Guides & Training Tools
Technical Information
-
Philips HeartStart HS1 Defibrillator
> Download
Dispatch, Delivery & Returns
-